Setup 4

Setup 4: VBS3Strike -> VBS3 (HOST) IPADDRESS.dat

∆ Image A4: Deployment Architecture Setup 4

Once VBS3 is installed, create two text documents in the VBS3 root folder and rename it as “VBS3FiresIPAddress.dat” & “VBS3StrikeIPAddress.dat”. Then right click and edit the file. Add Loopback IP as “127.0.0.1" and save.

∆ Image IP.A: VBS3StrikeIPAddress.dat

∆ Image IP.B: VBS3FiresIPAddress.dat

Create a “.dat” file in the VBS3 root folder of the VBS3 Trainee and rename it as “VBS3FiresIPAddress.dat”.
Open it and enter the IP address of the VBS3Strike Instructor.
Create a “.dat” file in the VBS3 root folder of the VBS3 Trainee and rename it as “VBS3StrikeIPAddress.dat”.
Open it and enter the IP address of the VBS3Strike Instructor.

IPADDRESS.dat(Standalone)

∆ Image IP.C: PC1  Host VBS3 (After assigning IP of PC2 to ipadr. File) PC2  Open VBS3Strike StandAlone mode

IPADDRESS.dat(Network)

∆ Image IP.D: One PC Host VBS3 after assigning IP of Instructor in both VBS3FiresIPAddress.dat & VBS3StrikeIPAddress.dat. Another PC Host VBS3 and saves IP of Pilot in both VBS3FiresIPAddress.dat & VBS3StrikeIPAddress.dat

Note:
Change the IP Address to the Loopback IP once the network missions are done.